Note: This step is optional, as the ARM bootldr is able to boot PocketPC automatically. It is only needed in case you want to restore the unit to its original version.
First, make sure that PocketPC boots correctly by pushing the recessed button at the lower right of the unit with a sharp object.
Note: If it is not booting, try reloading the PocketPC image, as described above.
You will need to use the same terminal emulation setup described in Chapter 3, then reboot the iPAQ as in Section 9.1. At the boot prompt, type:
boot> load bootldr |
Use the same procedure as in Section 9.1 to transfer the saved_bootldr.bin you saved in Chapter 2.